For troubleshooting purposes, using the IP address of a network printer can be very helpful to determine a printer’s status. First, verify the model of printer you are using. If using more ...
Only two instances can exist: FontSpecs.xml and the user-editable version, FontSpecs_User.xml. The file FontSpecs.xml must exist and should not be edited as it is part of the eFORMz version ...
Sizing and positioning of data in the ZPLII printer language is based on the configured printer resolution. Generally, this is done in Printers.xml for print output. eFORMzCfg_User.xml This can ...
SATO GY412 Recommended Settings Using a Sato GY412 as a wireless printer WardKraft Peeler for the SATO GY412 SATO GY412 Troubleshooting SATO GY412 “Offline” (Troubleshooting) SATO ...
Director Toolkit Windows There are three ways to start the Director Toolkit while running Windows: From your Windows desktop, select the Director Toolkit shortcut icon. From eFORMz Composer, ...
An improperly configured sub-port can cause communication complications with SATO GY-412 printers that prevent fluid label printing. For example: In this instance, there’s an active ...
Minisoft supports a variety of printer languages, including AFPDS, Avery/Monarch, Datamax DPL, Dymo, Epson ESC/POS, Intermec IPL, Intermec Fingerprint, PCL, PostScript, Printronix PGL, Sato SBPL, ...
If print performance isn’t optimal, confirm that eFORMz isn’t operating slowly. To do this, pause one of the print output queues on the eFORMz server and print some spool files to it. ...
1) Are you configuring the tray selection from within the project or the Director Toolkit? 2) On the physical printer, you must have the trays defined uniquely. Meaning, Tray 1 and 2 can’t ...
In general, there are two issues with ‘offline’ for the GY-412. (1) Old firmware can be overwhelmed with large spool files. (2) Sending the incorrect printer language, such as ZPL or PCL instead ...